A high-tech machine with digital measuring to find the smallest differences, dents.
The best for any business offering rim straightening and repair on any level.
- There are two pressing pedals. These pedals can be controlled separately with 8 directional joystick. The direction of the pressing pedals mounted on, can be calibrated as required. While one of the pedals is used as fixing support, with the other pedal, the leveling procedure can be done much faster and properly. During pressing, digital mesurement prob provides to see the mesuremental value of pressing by position it on the rim in the mean time.- Mesurement prob can be simply positioned with the joystick which is on the controll panel by the help of sensible lineer slides and 2 axes motor controlling system.
- The probe, which is positioned on the rim with joystick, can mesure the up –down flexures and also, in the mean time the right-left precessions on the rim due to its patented design.While it shows the millimetric value of the pressing of the pressing needs to be done, it also indicates the pressing direction with the lights shaped as arrow.
- It has a strong and rigid turning system which specially designed. Turning support can be positioned as required, due to its threaded mile on the turning system. After the calibration of direction and position of support, the turning system can be applied.
- With the new Quick Clamp system the mounting of a rim never had been easier before. You only need to check the number of the bolt holes, find the proper center ring, put the rim onto the shaft and fasten the nut. It is like a minute, compared to the original 3-4 minutes.
How much can a business charge for a repair?
Average straightening goes from 65.00$ to 150.00$.If you do the math, six rims a day 5 days a week. That is 1950.00$ a week with the lowest fee (65.00$).
More than 100k a year.
