Home >

MTM 17-33 WASTE OIL HEATER BURNER BLOW AIR
MTM 17-33 WASTE OIL HEATER BURNER BLOW AIR


 
Alternative Views:


The universal oil heater type MTM 17-33 is designed to heat up industrial rooms not covered with central heating systems (workshops, car repair shops, industrial shops, warehouses, storage buildings, basements, garages, etc.). The stove can operate using most waste oils of mineral and plant origin, e.g. engine, gear, hydraulic, fuel oil, with maximal density in temperature of 15°C equal to 890 kg/m3 and with ignition temperature exceeding 56°C.


Product Code: MTM33

DESCRIPTION TECHNICAL SPECS
 
The universal oil heater type MTM 17-33 is designed to heat up industrial rooms not covered with central heating systems (workshops, car repair shops, industrial shops, warehouses, storage buildings, basements, garages, etc.). The stove can operate using most waste oils of mineral and plant origin, e.g. engine, gear, hydraulic, fuel oil, with maximal density in temperature of 15°C equal to 890 kg/m3 and with ignition temperature exceeding 56°C.
Features
  • MTM 17-33 kW Closed combustion chamber with TURBO FAN

    TURBINE FAN INSIDE TOP COVER !!!

    Heater / Furnace universal oil MTM 17-33 is designed for heating industrial spaces outside the central heating system, such as basements, garages, workshops, warehouses, industrial buildings, farm buildings etc.


    Type of fuel that can be used in the heater:

    • Vegetable oils (BIOFUELS)
    • Waste vegetable oils (from restaurants and catering)
    • Mineral and synthetic oils
    • (used oil engine, transmission, hydraulic, power of HBO I, II, III, with a viscosity of not more than SAE80)


    Heat output: (with good insulation)

    MTM heater efficiently heats a space of upt o 1000 cubic meters.


    Characteristic of the heater :

    Variable power from 17kW to 33 KW

    CLOSED COMBUSTION CHAMER with FAN

    Specifications:

    • Protection against overheating
    • Overflow protection of oil in the furnace
    • Built-in microprocessor controller
    • Traffic lights with LEDs furnace defects
    • Aesthetic cover with powder coating
    • Combustion chamber made of stainless steel
    • High temperature resistance
    • Manual ignition
    • Warm air outlet temperature 50°C to 70°C
      (From the inside air temperature about 12°C)
    • Radiant heat in all directions – TURBINE FAN INSIDE TOP COVER !!!
    • Air flow 1000 cubic m / h
    • Oil consumption 1.5 l / h to 2.9 l / h
    • Tank capacity 50l
    • Weight 100 kg
    • Length 90 cm: Width 58 cm : Height 139 cm

Share your knowledge of this product. Be the first to write a review »